![PEX Pipe Tee, 3/8 x 3/4 x 1/2 In.](https://storage.googleapis.com/ezimage-cache/noscale/aHR0cHM6Ly9pbWFnZXMudHJ1ZXZhbHVlLmNvbS9nZXRpbWFnZS5hc3A_aWQ9MTk2NTg3JkltYWdlVHlwZT0xJk5vSW1hZ2VUeXBlPTEmQ29sb3JJbWFnZVNpemU9MyZMaW5lQXJ0SW1hZ2VTaXplPTI.webp)
Flair-it
Pex Pipe Tee, 3/8 X 3/4 X 1/2 In.
pex pipe tee, 3/8 x 3/4 x 1/2 in. - Description
The Flair-It PEX, Tee is a versatile fitting compatible with any brand or type of SDR-9 PEX or PE-RT tubing as well as Polybutylene pipe. Made of durable polyoxymethylene, it meets cNSF-14pw and NSF-61 standards and is manufactured to ASTM standards F876/F877 and CSA 137.5 specifications. Installation is simple - cut the tubing square, slide the nut along the tubing, rock the fitting into the tubing, slide the nut back onto the fitting, and tighten it. For 3/4 inch Polybutylene pipe, use the #26790 PB Adapter Sleeve. This tee is perfect for professional installation of hot and cold potable water systems or DIY plumbing repairs.
- 3/4 in. x 3/4 in. x 1/2 in.
- Tee
- For PEX Or Polybutylene
- On 3/4 in. Polybutylene You Must Use A #26790 Adapter.
- Made of durable polyoxymethylene material.
- Compatible with any brand or type of SDR-9 PEX or PE-RT tubing as well as Polybutylene pipe.
- Meets cNSF-14pw and NSF-61 standards.
- Manufactured to ASTM standards F876/F877 and CSA 137.5 specifications.
- Easy to install - cut the tubing square, slide the nut along the tubing, rock the fitting all the way into the tubing, slide the nut back onto the fitting and tighten it as far as it will go.